office (334) 283-2944
fax (334) 283-2942
internet fax (815) 642-4009

Asphalt Pads

 

Specification

  • Preformed engineered product of specified dimension without a backing of release paper.
  • Upon bake out in paint shop oven, product will melt and expand.
  • Good adhesion to oily sheet metal.
  • Product was designed to carry good damping properties
  • Non-hazardous material

Usage

  • Applicable to E-coated substrate to provide good damping properties.

 

 

Properties

        Properties                   Value

  • Appearance                black color
  • Main Component          Ashphalt
  • Ash Content                30% maximum
  • Density                      1.2~1.6
  • Volumetric Expansion    200% minimum
  • Vibration Loss Factor    0.2 minimum @ 20°C
                                    0.4 minimum @ 40°C
  • Storage Stability          3 months at room temperature

Application method

  • Equipment: No special equipment needed
  • Material: Application temperature 20 ~ 30°C
                           Store at room temperature
  • Curing Condition: 150°C x 30 minutes
  • Container: Corrugated box

 

 

 

All technical information, statements and suggestions contained are based on tests we believe to be accurate, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties expressed or implied:
Seller's and manufacturer's only obligation shall be to replace such quantity of the products proved to be defective. neither seller nor manufacturer shall be liable for any injury, loss of damage, direct or consequential arising out of the use of the products. Before using, user shall determine the suitability of the products for this intended use, and user assumes all risk and liability whatsoever in connection therewith.