office (334) 283-2944
fax (334) 283-2942
internet fax (815) 642-4009

NFW Hemming Sealer

Specification

  • Easy to use with one component type.
  • Good adhesion to oily sheet metal.
  • No bending or shrinkage of PNL caused by strong adhesion.
  • Good corrosion resistance allowing reduced number of welds.
  • Included glass beads for the fixation of panel before cured.
  • Non-hazardous material

Usage

  • Applicable to various parts of automobile for strong adhesion, water tightness and corrosion resistance.
    (Example: F/FLANGE Part of DOOR, HOOD, etc.)

 

 

 

Properties

Properties                   Value

  • Appearance                Black color paste
  • Main Component          Epoxy resin
  • Density                      1.50± 0.1
  • Solid Content              Over 99%
  • Viscosity                    400,000 ~ 900,000 cps at 20°C
  • G/Beads                     4 ~ 5%
  • G/beads size               270± 40 µm micrometer
  • Storage Stability          3 months at room temperature

Application Method

  • Equipment: PUMP - 55:1
  • Material: Application temperature 20 ~ 30°C
                         Store at room temperature
  • Curing Condition: 180°C x 20 Minutes minimum
  • Container: Drum 200 ~ 270 kg
                   5 gal pail 20 ~ 25 kg

 

 

 

All technical information, statements and suggestions contained are based on tests we believe to be accurate, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties expressed or implied:
Seller's and manufacturer's only obligation shall be to replace such quantity of the products proved to be defective. neither seller nor manufacturer shall be liable for any injury, loss of damage, direct or consequential arising out of the use of the products. Before using, user shall determine the suitability of the products for this intended use, and user assumes all risk and liability whatsoever in connection therewith.