office (334) 283-2944
fax (334) 283-2942
internet fax (815) 642-4009

Spot Weld Sealer

      

Specification

  • Easy to use with one component type.
  • No adverse effect to spot weld.
  • Good corrosion resistance with good adhesion to oily sheet metal.
  • Good water tight property with good sealing effect.
  • Non-hazardous material

Usage

  • Applicable to the carious steel sheet connecting parts of automobile for increasing water tightness and corrosive resistance.
    (For example: W/HOUSE, COWL,TOPE, etc.)

  

 

 

Properties

Properties                   Value

  • Appearance                Gray or black color paste
  • Main Component          Synthetic rubber
  • Density                      Below 1.45
  • Solid Content              Over 98%
  • Viscosity                    2000 ~ 2,500 cps at 20°C
  • Storage Stability          3 months at room temperature

Application method

  • Equipment: PUMP - 55:1
  • Material: Application temperature 20~30°C
                 Store at room temperature
  • Curing condition: 180°Cx20min
  • Container: Drum 200 ~ 270kg
                   5gal pail 20kg

 

 

 

All technical information, statements and suggestions contained are based on tests we believe to be accurate, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties expressed or implied:
Seller's and manufacturer's only obligation shall be to replace such quantity of the products proved to be defective. neither seller nor manufacturer shall be liable for any injury, loss of damage, direct or consequential arising out of the use of the products. Before using, user shall determine the suitability of the products for this intended use, and user assumes all risk and liability whatsoever in connection therewith.