office (334) 283-2944
fax (334) 283-2942
internet fax (815) 642-4009

PVC Body Sealer

Specification

  • Easy to use with one component type.
  • No color change after curing.
  • No need to distinguish between inside and outside.
  • Good adhesion and workability.
  • Non-hazardous material

Usage

  • Applicable onto moving parts, outside flange, PNL CLICHING area of automobile for watertight and anticorrosive.
    (for Example: DOOR, HOOD, T/LID, PNL CLICHING area)

         

 

Properties

Properties                   Value

  • Appearance                White color paste
  • Main Component          PVC resin
  • Density                      Below 1.70
  • Solid Content              Over 98%
  • Viscosity                    70,000 ~ 130,000 cps at 20°C
  • Storage Stability          3 months at room temperature

Application method

  • Equipment: PUMP - 55:1
                    Pipe - heating equipment
  • Material: Application temperature 20 ~ 30°C
                Store at room temperature
  • Curing Condition: 130°Cx20min->
                            150°Cx20min->
                            150°Cx20min
  • Container: Magnadrum 1500kg
                   Drum 200 ~ 270 kg
                   5gal pail 20kg

 

 

 

All technical information, statements and suggestions contained are based on tests we believe to be accurate, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties expressed or implied:
Seller's and manufacturer's only obligation shall be to replace such quantity of the products proved to be defective. neither seller nor manufacturer shall be liable for any injury, loss of damage, direct or consequential arising out of the use of the products. Before using, user shall determine the suitability of the products for this intended use, and user assumes all risk and liability whatsoever in connection therewith.